Skip to content
IEC 60502-1 · IEC 60228  ·  LV Power, Armoured, LSZH & Fire-Resistant Cable Manufacturer
ZMS Cable logo
Home  /  Products  /  Flexible Industrial Cables  /  Flexible Drag Chain Industrial Cable
Flexible Industrial Cables

Drag Chain Cable for Continuous Flexing

Fine-strand copper conductors, short lay length and a PUR sheath for continuous flexing in drag chains, robot axes and moving machine carriages.

Voltage300/500 V
Cores2 – 37
Size0.5 – 35 mm²
SheathPUR
Flex life3–5 M cycles
Description

Construction and behaviour

A drag chain cable is defined by movement, not by voltage. It must survive millions of bending cycles at speed and acceleration, often with oil, coolant and swarf present. Three things make that possible: a fine-strand conductor that bends without concentrating stress, a short lay length that keeps the cores together as the chain rolls, and a sheath compound that resists abrasion.

PUR is the usual sheath for this duty. It resists abrasion, oil and hydrolysis far better than PVC and keeps its flexibility at low temperature. For lighter duty and dry environments, PVC versions are available at lower cost.

The installation decides the service life. The cable must be free to move in the chain, with clearance around it, and the bend radius must be at least the datasheet minimum. Cables that are tied tightly, twisted, or run over a radius that is too small will fail early regardless of construction.

Cores are identified and laid up with a short pitch, and a fleece or non-woven wrap keeps the assembly round under load. Shielded versions add a braided copper screen for drive and encoder signals.

Technical parameters

Specification table

StandardIEC 60227-5, IEC 60228, VDE 0250 where specified
Rated voltage300/500 V (0.6/1 kV on request)
ConductorClass 5 / Class 6 fine-strand copper, bare or tinned
Cross-section0.5 – 35 mm²
Cores2 – 37, higher counts on request
InsulationTPE or PVC
SheathPUR, oil and abrasion resistant
Bending radius7.5 × diameter (fixed), 10 × (moving)
Flex life3 – 5 million cycles at defined radius and speed
Temperature range−30 °C to +80 °C (PUR)
PackingCoil or drum, cut lengths available
Standards: manufactured and tested to IEC 60502-1 and IEC 60228. Type test reports and routine test results are issued with the batch documents.
Options

Available constructions

ConstructionTypical use
Unshielded PURPower and digital signals in drag chains without EMI risk.
Shielded PURBraided screen with drain wire for drives and encoders.
Tinned copperImproved corrosion resistance for wet or marine-adjacent plant.
PVC flexibleLighter duty, dry environment, lower cost.
Applications

Where it is used

  • Machine tools — Tool changers, gantries and sliding heads in CNC equipment.
  • Packaging lines — Form-fill-seal machines, case packers and palletisers.
  • Robotics — Bend and torsion applications on arms and end effectors.
  • Material handling — Stacker cranes, transfer cars and conveyor carriages.
Packing & delivery

How it ships

  • Coils of 50 m / 100 m or drums for longer lengths.
  • Cut lengths with terminated ends on request.
  • Cable chain compatibility data (diameter, weight, minimum radius) supplied with the order.
  • Shielded versions supplied with drain wire and screen coverage stated.

Request datasheet & price

Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.

Get a Quote WhatsApp Us
Response< 24 h
MOQOn request
Technical FAQ

Questions buyers ask about this cable

What bend radius should the chain be designed for?
Use at least 10 × cable diameter for continuous flexing, and confirm against the datasheet value for the specific construction. The chain radius, not the cable, normally sets the limit.
How do I estimate service life?
Life is a function of travel, speed, acceleration, radius and fill weight. Our test data gives cycles at a defined condition; send the application data and we will confirm the expected life.
Can the cable be used on a robot arm?
Bend-only applications in a drag chain and torsion applications on a robot arm are different duty. State the axis movement — bending, torsion or both — so the correct construction is quoted.
Do you supply pre-assembled harnesses?
Cable is supplied in coils, drums or cut lengths. Terminated harnesses can be discussed for repeat orders with a fixed drawing.

Request datasheet & price

Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.

Get a Quote WhatsApp Us
Response< 24 h
MOQOn request
Related products

Often specified with this cable

Related constructions from the same or a neighbouring family.

All products
Shielded low voltage power cable with copper tape screen
LV Power Cables (0.6/1kV)

Shielded LV Power Cable

0.6/1kV cable with copper tape or wire screen and drain wire for VFD outputs, EMI-heavy plants and sensitive equipment feeds.

0.6/1 kVCu tape / braid1.5 – 300 mm²
View product →

Request a quotation for Flexible Drag Chain Industrial Cable

Share the application, voltage, core count, conductor size, screen or armour, sheath and delivery destination. Our engineering team replies within one business day.

This field is required.
This field is required.
This field is required.