Skip to content
IEC 60502-1 · IEC 60228  ·  LV Power, Armoured, LSZH & Fire-Resistant Cable Manufacturer
ZMS Cable logo
Home  /  Products  /  LV Power Cables (0.6/1kV)

Low Voltage Power Cables 0.6/1kV

Copper or aluminium conductors, PVC or XLPE insulation, 1 to 5 cores, 1.5 to 630 mm², with PVC, PE or LSZH sheathing.

Get a Quote Technical Parameters
0.6/1kV low voltage power cable constructions with PVC and XLPE insulation
Category 01

LV Power Cables (0.6/1kV)

The general-purpose range: 0.6/1kV cables that carry final-circuit power from a distribution board to machines, panels, lighting and building services. Choose PVC insulation for dry indoor routes and XLPE where the conductor needs to run hotter or the circuit is exposed to moisture and sunlight.

0.6/1 kV1–5 cores1.5–630 mm²PVC / XLPECu / AlIEC 60502-1
Request a Quotation
Products in this family

LV Power Cables (0.6/1kV)

Each product can be supplied to the standard construction or adapted to the project specification.

Shielded low voltage power cable with copper tape screen
Product

Shielded LV Power Cable

0.6/1kV cable with copper tape or wire screen and drain wire for VFD outputs, EMI-heavy plants and sensitive equipment feeds.

0.6/1 kVCu tape / braid1.5 – 300 mm²
View product →

Related families

Often specified alongside this range.

Technical parameters

Construction and ratings

Rated voltage0.6/1 kV (U0/U)
Cores1, 2, 3, 3+1, 4, 4+1, 5
Cross-section1.5 – 630 mm² (copper) / 16 – 400 mm² (aluminium)
ConductorClass 1 solid or Class 2 stranded, plain copper or aluminium
InsulationPVC (70 °C) or XLPE (90 °C)
SheathPVC ST1/ST2, PE or LSZH
StandardIEC 60502-1, IEC 60228
Test voltage3.5 kV AC for 5 minutes
Values are for the standard construction. Current ratings depend on installation method, ambient temperature and grouping — confirm against IEC 60364-5-52 before finalising the section.

Request datasheet & price

Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.

Get a Quote WhatsApp Us
Response< 24 h
MOQOn request
Performance

What the construction gives you

  • PVC compound rated 70 °C continuous, XLPE rated 90 °C with a 250 °C short-circuit allowance.
  • XLPE constructions tolerate higher current per cross-section, which allows a smaller conductor for the same load.
  • Grade ST2 PVC sheath resists abrasion and is suitable for trays, ducts and light outdoor use; PE is specified for wet or buried routes.
  • Core identification by colour (HD 308) or by numbered cores for large multicore cables.
  • Optional LSZH sheath, oxygen barrier or anti-termite additive on request.
Where it is used

Applications

Industrial plants

Machine feeds, motor circuits, sub-distribution inside factories and workshops.

Commercial buildings

Risers, tenant distribution, lighting and small power circuits.

Municipal works

Pumping stations, street lighting feeders, public facility distribution.

Renewable LV side

Low voltage auxiliary and inverter-to-transformer connections.

Technical FAQ

Frequently asked questions

PVC or XLPE insulation — how do I choose?
Use PVC for dry, indoor, lightly loaded circuits where cost matters. Specify XLPE when the ambient temperature is high, the circuit is fully loaded for long periods, or the cable runs outdoors and needs a 90 °C conductor rating and better moisture resistance.
Can the cable be used for direct burial?
Only with an appropriate sheath or armour. A plain PVC-sheathed cable is for ducts, trays and indoor routes. For direct burial specify PE sheath or move to our armoured range, which adds galvanised steel tape and a bedding layer.
Which core configuration should I order?
Three-phase circuits normally use 3+1, 4 or 4+1 cores depending on whether a neutral is required and whether the neutral is reduced. Single-phase final circuits use 2 or 3 cores. State the earthing arrangement (TN-S, TN-C-S, TT) and we will confirm the core count.
Do you supply cut lengths and drum sizes?
Yes. Standard drums are 500 m and 1000 m, and we can cut to project lengths. For long pulls we mark the length every metre and provide a drum schedule so the site team can match drums to pulls.

Request datasheet & price

Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.

Get a Quote WhatsApp Us
Response< 24 h
MOQOn request
Engineering support

Need lv power cables (0.6/1kv) for a project?

Send the cable schedule and the delivery port. We will confirm construction, standard and lead time with the quotation.