
Shielded LV Power Cable, 0.6/1kV
0.6/1kV cable with a copper tape or braided screen and drain wire, for variable speed drive outputs and feeders in electrically noisy plants.
Construction and behaviour
A shielded power cable controls the electric field around the conductors. On variable speed drive outputs the PWM waveform produces high-frequency currents that travel on the cable surface, radiate into nearby signal cables and can interfere with encoders, sensors and communications.
A copper tape or braided screen with a drain wire provides a low-impedance return path for those currents. The screen must be earthed at both ends for the high-frequency component to circulate, and the gland or clamp must bond the screen around its full circumference — a pigtail connection defeats most of the benefit.
Copper tape gives high coverage at lower cost and is the usual choice for fixed feeders. Braided copper is more flexible and better for installations that need repeated bending or where mechanical robustness of the screen matters.
Shielded cable is not a substitute for separation. Keep power and signal routes apart, cross at right angles where they must meet, and bond the screen to the same earth reference as the drive. Screening and routing work together.
Specification table
| Standard | IEC 60502-1, IEC 60228 |
|---|---|
| Rated voltage | 0.6/1 kV (U0/U) |
| Conductor | Class 1 or Class 2 copper |
| Cross-section | 1.5 – 300 mm² |
| Insulation | XLPE (90 °C) or PVC (70 °C) |
| Screen | Copper tape (overlapping) or braided copper, coverage on request |
| Drain wire | Tinned copper, 0.5 – 6 mm² depending on size |
| Sheath | PVC ST2, PE or LSZH |
| Bending radius | 12 × overall diameter |
| Termination | Full-circumference screen bond at both ends |
| Packing | Drum, project lengths |
Available constructions
| Construction | Typical use |
|---|---|
| Cu / XLPE / Cu tape / PVC | VFD output and feeder cable for fixed installation. |
| Cu / XLPE / braid / PVC | Higher flexibility and mechanical screen robustness. |
| Cu / XLPE / Cu tape / LSZH | Screened and low smoke for tunnels and public buildings. |
| Screened + STA | Screened cable with steel tape armour for buried routes. |
Where it is used
- VFD outputs — Motor cables between drive and motor where PWM noise is present.
- Automation plants — Feeders running alongside encoder, sensor and network cabling.
- Data & telecom rooms — Power feeds into areas with sensitive equipment.
- Substations — Low voltage circuits in electrically noisy yards.
How it ships
- Drums marked with length, screen type and gross weight.
- Screen coverage and drain wire size stated on the drum label and test report.
- Glands with full-circumference bonding can be quoted with the cable.
- Drum schedule issued before shipment.
Request datasheet & price
Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.
Get a Quote WhatsApp UsQuestions buyers ask about this cable
Should the screen be earthed at one end or both?
Does a screen reduce the cable current rating?
Can I use shielded cable for the motor and unshielded for the supply?
What coverage do you offer?
Request datasheet & price
Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.
Get a Quote WhatsApp UsOften specified with this cable
Related constructions from the same or a neighbouring family.
All products
0.6/1kV PVC/XLPE Insulated LV Power Cable
The general-purpose 0.6/1kV cable for final circuits: copper conductor, PVC or XLPE insulation, 1 to 5 cores, PVC, PE or LSZH sheath.
View product →
Flexible Drag Chain Industrial Cable
Fine-strand copper, short lay length and PUR sheath for 3–5 million bending cycles in drag chains, robots and moving machine parts.
View product →Request a quotation for Shielded LV Power Cable
Share the application, voltage, core count, conductor size, screen or armour, sheath and delivery destination. Our engineering team replies within one business day.
