Skip to content
IEC 60502-1 · IEC 60228  ·  LV Power, Armoured, LSZH & Fire-Resistant Cable Manufacturer
ZMS Cable logo
Home  /  Products  /  LV Power Cables (0.6/1kV)  /  Aluminum Conductor LV Cable
LV Power Cables (0.6/1kV)

Aluminum Conductor LV Cable, 0.6/1kV

0.6/1kV aluminium conductor cable, XLPE insulated, 16 to 400 mm², for long feeders where conductor weight and cost dominate the selection.

Voltage0.6/1 kV
ConductorAluminium
Size16 – 400 mm²
InsulationXLPE
StandardIEC 60502-1
Description

Construction and behaviour

Aluminium conductor cable is chosen for two reasons: weight and cost. Aluminium weighs roughly a third of copper for the same volume, and on large feeders that difference changes drum sizes, pulling equipment and support loads. On long runs the material cost is also lower.

The engineering compromise is conductivity. Aluminium carries about 61 % of the current of copper for the same cross-section, so a larger conductor is needed for an equivalent rating — typically one or two standard sizes up. The cable is still lighter and lower in material cost at that size.

Termination needs attention. Aluminium forms an oxide layer quickly, so joints must use bimetallic lugs or approved transition compounds, and the conductor should be brushed and terminated promptly. In damp or coastal environments, compound-filled glands are preferred.

The construction is otherwise the same as a copper cable: XLPE insulation for a 90 °C conductor rating, cores laid up with fillers, and a PVC, PE or LSZH sheath. Three-core and 3+1 configurations are common for distribution feeders.

Technical parameters

Specification table

StandardIEC 60502-1, IEC 60228
Rated voltage0.6/1 kV (U0/U)
ConductorClass 1 solid or Class 2 stranded aluminium
Cross-section16 – 400 mm²
InsulationXLPE (90 °C) or PVC (70 °C)
Cores1, 3, 3+1, 4, 4+1
SheathPVC ST2, PE or LSZH
Temperature range−15 °C to +90 °C (XLPE)
Bending radius12 × overall diameter
TerminationBimetallic lugs or approved transition compound
PackingDrum, 500 m / 1000 m or project lengths
Standards: manufactured and tested to IEC 60502-1 and IEC 60228. Type test reports and routine test results are issued with the batch documents.
Options

Available constructions

ConstructionTypical use
Al / XLPE / PVCGeneral distribution feeders indoors and in ducts.
Al / XLPE / PEWet or buried routes where moisture resistance is required.
Al / XLPE / STA / PEArmoured aluminium feeder for direct burial.
Al / PVC / PVCEconomical 70 °C construction for lightly loaded circuits.
Applications

Where it is used

  • Long feeders — Site distribution where copper weight would need special handling.
  • Industrial parks — Sub-main supplies between buildings and distribution rooms.
  • Pumping stations — Feeds to pumps and controls in remote or buried routes.
  • Rural distribution — Low voltage distribution where cost per metre is decisive.
Packing & delivery

How it ships

  • Drums marked with length, size and gross weight.
  • End caps sealed to prevent moisture ingress during shipping.
  • Bimetallic lugs and transition kits can be quoted with the cable.
  • Drum schedule issued before shipment.

Request datasheet & price

Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.

Get a Quote WhatsApp Us
Response< 24 h
MOQOn request
Technical FAQ

Questions buyers ask about this cable

How much larger must the aluminium conductor be?
Roughly one to two standard sizes above the copper equivalent, depending on the installation method and allowable voltage drop. Send the load and route length and we will calculate the section.
Can aluminium and copper be joined directly?
Not safely. Use bimetallic lugs or an approved transition compound; a direct joint creates a galvanic couple and a hot spot under load.
Is aluminium cable suitable for frequent movement?
No. Aluminium work-hardens and cracks under repeated bending. Use a fine-strand copper flexible cable for moving applications.
Does aluminium cable need special support?
Aluminium has a higher coefficient of expansion, so terminations should allow for movement and long vertical runs need appropriate cleats. Follow the installation guidance supplied with the order.

Request datasheet & price

Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.

Get a Quote WhatsApp Us
Response< 24 h
MOQOn request
Related products

Often specified with this cable

Related constructions from the same or a neighbouring family.

All products
Steel tape armoured low voltage power cable with XLPE insulation
Armoured LV Cables

Steel Tape Armoured LV Cable

STA and DSTA 0.6/1kV cable for direct burial and exposed routes: XLPE insulation, PVC bedding, galvanised steel tape, PE or PVC outer sheath.

0.6/1 kVSTA / DSTA4 – 400 mm²
View product →

Request a quotation for Aluminum Conductor LV Cable

Share the application, voltage, core count, conductor size, screen or armour, sheath and delivery destination. Our engineering team replies within one business day.

This field is required.
This field is required.
This field is required.