
0.6/1kV Power Cable, PVC or XLPE Insulated
Copper or aluminium conductor, PVC (70 °C) or XLPE (90 °C) insulation, 1 to 5 cores from 1.5 to 630 mm², sheathed in PVC, PE or LSZH to IEC 60502-1.
Construction and behaviour
This is the workhorse cable of low voltage distribution. It takes power from a panel or distribution board to machines, sub-boards, lighting circuits and building services, and it is the cable most often quoted when a project simply says “0.6/1kV power cable”.
The construction is straightforward: Class 1 solid or Class 2 stranded conductor, an extruded insulation layer, cores laid up with fillers, and an extruded outer sheath. What changes between projects is the insulation compound, the sheath compound and the core identification — and those three decisions are what determine service life and compliance.
Copper is the default conductor for industrial work because of its conductivity and termination behaviour. Aluminium is specified where weight and cost dominate on larger sections; it needs bimetallic lugs and a slightly larger cross-section for the same current.
For fixed routes in dry indoor areas, PVC insulation at 70 °C is sufficient and economical. Where the cable is fully loaded, exposed to sunlight, or installed in a hot plant room, XLPE at 90 °C allows a smaller conductor for the same load and gives better moisture resistance.
Specification table
| Standard | IEC 60502-1, IEC 60228, IEC 60332-1-2 |
|---|---|
| Rated voltage | 0.6/1 kV (U0/U) |
| Conductor | Class 1 solid or Class 2 stranded copper; aluminium on request |
| Cross-section | 1.5 – 630 mm² (copper), 16 – 400 mm² (aluminium) |
| Insulation | PVC type PVC/C (70 °C) or XLPE (90 °C) |
| Core arrangement | 1, 2, 3, 3+1, 4, 4+1, 5 cores; shaped conductor on larger multicore |
| Core identification | Colour to HD 308, or numbered cores above 5 cores |
| Sheath | PVC ST1/ST2, PE or LSZH; black standard, other colours on request |
| Temperature range | PVC: −5 °C to +70 °C; XLPE: −15 °C to +90 °C |
| Bending radius | 12 × overall diameter (fixed installation) |
| Test voltage | 3.5 kV AC / 5 min between conductors and sheath |
| Packing | Steel or wooden drum, 500 m / 1000 m, or project lengths |
Available constructions
| Construction | Typical use |
|---|---|
| Cu / PVC / PVC | Standard indoor cable, 70 °C, lowest cost for dry routes. |
| Cu / XLPE / PVC | Higher current rating and 90 °C conductor for loaded circuits. |
| Cu / XLPE / PE | Moisture-resistant sheath for ducts, wet areas and light burial. |
| Cu / XLPE / LSZH | Low smoke halogen free where escape routes or equipment protection matter. |
| Al / XLPE / PVC | Cost and weight saving on larger feeders; bimetallic lugs required. |
Where it is used
- Machine and motor feeds — Final circuits inside workshops, from sub-board to machine isolator.
- Sub-distribution — Panel-to-panel feeders in factories, warehouses and commercial buildings.
- Lighting and small power — Fixed lighting circuits, socket final circuits and HVAC connections.
- Auxiliary supply — Low voltage auxiliary circuits in plants and renewable energy stations.
How it ships
- Drums are marked with cable description, length, drum number and gross weight.
- Length marking every metre on request for long pulls and cable schedules.
- Drum schedule issued before shipment so the site team can match drums to pulls.
- Export packing with timber treatment certificate where the destination requires it.
Request datasheet & price
Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.
Get a Quote WhatsApp UsQuestions buyers ask about this cable
What is the current rating of a 4 × 25 mm² cable?
Can I get a 3+1 core configuration?
Do you provide test certificates?
What is the lead time for a 20 km order?
Request datasheet & price
Send the project specification and we will confirm construction, standard and delivery schedule. Samples for approval can be arranged.
Get a Quote WhatsApp UsOften specified with this cable
Related constructions from the same or a neighbouring family.
All products
Aluminum Conductor LV Cable
0.6/1kV aluminium conductor cable for long feeders where weight and cost matter: XLPE insulation, 16 to 400 mm², PVC or PE sheath.
View product →
Shielded LV Power Cable
0.6/1kV cable with copper tape or wire screen and drain wire for VFD outputs, EMI-heavy plants and sensitive equipment feeds.
View product →
Steel Tape Armoured LV Cable
STA and DSTA 0.6/1kV cable for direct burial and exposed routes: XLPE insulation, PVC bedding, galvanised steel tape, PE or PVC outer sheath.
View product →Request a quotation for 0.6/1kV PVC/XLPE Insulated LV Power Cable
Share the application, voltage, core count, conductor size, screen or armour, sheath and delivery destination. Our engineering team replies within one business day.
