Low Voltage Cable Products
Five families, seven standard products and the option to build to a project specification. All 0.6/1kV, all to IEC 60502-1.
Request a QuoteStart from the route, the load or the fire strategy
Most projects need two or three of these families rather than one. If the specification crosses categories, we quote a single consolidated order.

LV Power Cables (0.6/1kV)
The general-purpose range: 0.6/1kV cables that carry final-circuit power from a distribution board to machines, panels, lighting and building services.
View range
Armoured LV Cables
Armoured cable is specified when the route itself is the risk: buried ducts, factory yards, cable trenches shared with traffic, or areas where rodents and impact are a real possibility.
View range
LSZH Flame Retardant
In a fire, ordinary PVC cable releases dense smoke and hydrogen chloride.
View range
Flexible Industrial Cables
A standard fixed-installation cable fails quickly when it is bent continuously.
View range
Fire Resistant LV Cables
Fire resistant cable is not the same as flame retardant cable.
View rangeSeven constructions held as standard
Each product page carries the full construction, parameter table, standard references and packing details.

0.6/1kV PVC/XLPE Insulated LV Power Cable
The general-purpose 0.6/1kV cable for final circuits: copper conductor, PVC or XLPE insulation, 1 to 5 cores, PVC, PE or LSZH sheath.
View product →
Steel Tape Armoured LV Cable
STA and DSTA 0.6/1kV cable for direct burial and exposed routes: XLPE insulation, PVC bedding, galvanised steel tape, PE or PVC outer sheath.
View product →
LSZH Flame Retardant LV Cable
0.6/1kV XLPE cable with a halogen-free low-smoke sheath, tested to IEC 60754 and IEC 61034 for tunnels and public buildings.
View product →
Flexible Drag Chain Industrial Cable
Fine-strand copper, short lay length and PUR sheath for 3–5 million bending cycles in drag chains, robots and moving machine parts.
View product →
Fire Resistant LV Power Cable
Mica tape barrier over the conductor, XLPE insulation and LSZH sheath, tested to IEC 60331 and BS 6387 CWZ for fire survival circuits.
View product →
Aluminum Conductor LV Cable
0.6/1kV aluminium conductor cable for long feeders where weight and cost matter: XLPE insulation, 16 to 400 mm², PVC or PE sheath.
View product →
Shielded LV Power Cable
0.6/1kV cable with copper tape or wire screen and drain wire for VFD outputs, EMI-heavy plants and sensitive equipment feeds.
View product →Which family fits which circuit
A quick reference for the first conversation. The final construction still depends on derating, grouping and the earthing design.
| Family | Voltage | Products | Typical first use |
|---|---|---|---|
| LV Power Cables (0.6/1kV) | 0.6/1 kV (U0/U) | 0.6/1kV PVC/XLPE Insulated LV Power Cable / Aluminum Conductor LV Cable / Shielded LV Power Cable | Industrial plants |
| Armoured LV Cables | 0.6/1 kV (U0/U) | Steel Tape Armoured LV Cable | Direct burial |
| LSZH Flame Retardant | 0.6/1 kV (U0/U) | LSZH Flame Retardant LV Cable | Metro & tunnels |
| Flexible Industrial Cables | 300/500 V, 0.6/1 kV on request | Flexible Drag Chain Industrial Cable | Drag chains |
| Fire Resistant LV Cables | 0.6/1 kV (U0/U) | Fire Resistant LV Power Cable | Emergency lighting |
Need a construction that is not in the catalogue?
Cores, sections, sheath compounds, armour types and core colours can all be adapted. Send the requirement and we will confirm feasibility.
